Write a Review

Stay fully planted as you smash the mountain. The lightweight Smash pedal offers uncompromising performance with its strategically placed pins and bulletproof, extended axle design. - Body: Reinforced Premium Thermopoly - Axle: CNC-machined Cro-Mo - Bearings: Ultralight, self-lubricating sealed bushings - Replaceable pins - Size: 113mm x 114mm - Weight: 180g (each)

Our Sport Hydration Drink Mix was created for a simple purpose—to replace the electrolytes lost in sweat and to provide a little bit of energy when working out, without offending your palate or gut. We initially created this drink because some of the world's best athletes needed better. Conventional sports drinks made them sick. They were undrinkable—too sweet, over-flavored, and didn't even replace what was lost in sweat—which defeated the whole purpose, like fighting thirst with more thirst. The best athletes needed something to safely hydrate, something to quench their thirst, and something to help them perform better. So with their help, we reimagined sports drinks, stripping down what used to be a neon-colored carnival to its bare essentials. In the process, we learned that simple wasn't just better for elite athletes, it was better for everyone who works hard and sweats. The result is a sports drink with minimal sugar (4g per 100 ml) and a ratio of sugar (glucose + fructose) that is optimized for faster absorption, an electrolyte profile that actually matches what is lost in sweat (800 mg sodium, 80 mg potassium, 100 mg calcium, and 80 mg of magnesium per liter), and only real fruit for flavor for a light and refreshing taste that you can drink all day. That's it—less sugar, the right electrolyte profile, and real fruit. So, if you've never met a sports drink you wanted to take home, your luck is about to change. Drink when thirsty and leaking like a busted fire hydrant. Don't drink while deep in the middle of a Netflix marathon session or sending emails (unless, you're also on your trainer). Meaning, if you haven't earned it, you don't deserve it.

Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams

absoluteBLACK Oval 104/64 BCD Chainrings greatly improve traction and climbing abilities. They are designed for use with all cranksets with a 104/64 BCD interface, including Shimano, SRAM, Race Face, FSA, and more. These chainrings allow you to run a 1x system without chain retention issues. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - 9, 10, 11, and 12-speed Eagle compatible

Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right. - Made from Aluminum, anodized or polished finish, without logos - 1-1/8" Diameter - S.H.I.S. Stem Clamp Diameter: 28.6mm

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

Riding bikes is all about getting outside, feeling strong, and reveling in confidence to keep the workout going. We know that curvy road bike handlebars don't fit everyone's lifestyle, so we developed our line of Verza Speed bikes accordingly. They're perfect for jetting around on two wheels for a workout, errand, or a commute to work, and they integrate flawlessly into daily routines, all with a focus on fun. Verza Speed 40 Updated with more efficient gearing, the Verza Speed 40 is a great all-rounder that's perfect for any ride, commute, or cruise. - Shimano Altus shifting - Triple-chainring crankset - Hydraulic disc brakes

All-around trail performance Hear the call of the trail? Adorn is the all-around performance women's mountain bike shoe that awakens the spirit of adventure in trail riders everywhere. Grippy Tachyon rubber soles deliver off-bike confidence while the durable reinforcement of GnarGuard offers protection against trail debris. Product details - inForm Race last offers a slightly roomier, high-performance fit - Glass-reinforced internal nylon plate with full Tachyon rubber outsole - Reliable 3-strap hook and loop closure system - Stiffness index - 6 of 14 - GnarGuard outer protection fights away trail brush and debris - Women's Specific Design is engineered specifically to yield a better fit and greater comfort for women Specifications - Upper Fiber Content: 58.7% PU / 10.9% Polyester / 30.4% Nylon - Sole Fiber Content: 100% Rubber - Liner Fiber Content: 100% Polyester

Enjoy every road ride more with Pearl Izumi's Women's Race Road III Shoes. The light, breathable uppers conform to your feet for superior comfort and the vented composite/nylon soles feature Pearl's Select 1:1 Power Plates and a concave shape that cradles your feet for excellent pedaling efficiency. Meanwhile, Pearl's Select 1:1 Heel Cups hold your heels nicely in place and the anatomically designed double-strap closures with Pearl's ratcheting 1:1 Buckle Closures let you enjoy a truly custom fit.

Fiercely built for road warriors, the Breakaway bottle delivers quick hydration from the first mile to the last. Thirst has finally met its match. Don't let this reusable bottle's lightweight, compact design fool you. Our Breakaway bottle delivers effortless, reliable hydration to fuel your race days, recovery days, and beyond. Designed by cyclists for cyclists, the Breakaway's sleek form makes for effortless sipping and fits most bike cages. When pedal meets pavement, the high-flow, self-sealing Surge Valve delivers a blast of hydration without messy spills—keeping you focused on the bike path, trailhead, or road ahead. Chill out, drink up. Then get back in the saddle and enjoy the ride—despite the pain. - The Surge valve maximizes flow rate and self-seals to eliminate spills and splatter. It's spill-proof when open, and pushes closed for leak-proof transport. - The original, 100% BPA-free bike water bottle. The updated Breakaway water bottle features a sleek, single-wall design that is light, durable, and compact. - Made for cyclists by cyclists, the Breakaway series fits securely in a variety of bottle cages. The new Polar Bottle shape has a unique grip groove and wall design for effortless hydration. - The innovative Surge Cap is two pieces–cap and valve–and easy to clean. Simply twist, pull, and wash. Plus, they're dishwasher safe. - Polar Bottle water bottles are crafted in Colorado to reduce environmental impact and support local economies. Designed to last, each one of our water bottles comes with a lifetime guarantee. - Capacity: 0.71 L / 24 fl oz - Dimensions: 9.0 x 2.75 in. - Material: LDPE, TPU Valve - Weight: 93 g / 3.3 oz

This new version of the proven, fast-rolling Randonneur tire features new 1c compound construction. - Hard-working, hard-wearing tire built for racking up big mileage - The ideal tire for city riding and touring, even in semi-wet conditions - ECE-R75 (European Certification e-bikes)

Zipp's 303 S Tubeless Disc Brake wheelset provides today's cyclists the versatility they demand with the speed they crave. Expanding greatly on its heritage of conquering the Spring Classics, this 303 wheelset maintains its ideal-for-every-terrain 45mm rim depth but adds a significantly wider internal width to provide greater performance and ride quality in almost every measurable way. This wheelset is tubeless for disc-brake bikes, allowing the ability to run wide tires at lower pressures for race-ready speed on or off the pavement. The 303 S is among our lightest wheelsets, optimized for top aero performance with a 28mm tire but capable of handling gravel tires up to 50mm wide. - Wide rims optimize tire profile to allow lower tire pressure, especially with tubeless. The result is a larger contact patch for increased grip and confident cornering, descending, and handling in wet conditions. - Lower tire pressures and larger volume provides a compliant ride with fewer vibrations. - Significant watt savings when running larger tires at lower pressure. - Wide, hookless rims create a seamless transition to the tire, reducing drag. - Fastest with 28mm, but fits wide gravel tires as well - New Zipp graphics and cosmetic identity that scream speed

Women's lightweight, high-performance mid-range road shoe. Synthetic Leather Lighter, stronger and more durable than natural leathers Carbon Sole/Mid Sole Carbon fiber composite sole/mid sole Wider Cleat Adjustment Expands range for mounting cleats - Surround wrapping upper structure reduces overlap and provides a glove-like fit - Low stack height midsole helps stabilize foot, maximizing power transfer and efficiency - Integrated sole and upper construction sets a new level of fit, stability, rigidity, and lightweight performance - Mesh/TPU/Synthetic leather composite upper provides a comfortable fit and better breathability - Lightweight carbon fiber reinforced nylon sole for power transfer - Women's specific last for a natural, comfortable fit

The Race Face Aeffect crank is designed to handle aggressive trail riding at XC crank weight and an attractive price point. Features the CINCH system with its interchangeable spider options and a 24mm EXI interface spindle. - Crank arms forged from 6066 aluminum - Compatible with all CINCH direct mount rings and spiders to easily convert between existing chainring standards - Compatible with direct mount, 1x, 2x with - and without bash, and 3x configurations - 24mm EXI spindle compatible with Race Face X-Type bottom brackets or Hollowtech II compatible bottom brackets - CINCH removable spiders and direct mount rings utilize a 20-tooth ISIS cup BB tool for removal and installation - Bottom bracket sold separately

We’ve taken many of the features found in our most sophisticated bibs and combined them in this value-packed short. It’s cut from a fabric made with recycled polyester yarns, and we’ve used the material’s natural stretch to reduce seams and increase comfort while simultaneously creating a stellar fit for even the most dynamic riding. It includes our comfortable and highly breathable Women’s SELECT Escape 1:1 chamois. - Comfortably compressive SELECT Transfer fabric made with recycled nylon - Raw-Edge, compressive knit Transfer bib straps, reduced seams for enhanced comfort - Pass-through X-Back bib straps with drop-tail design - Elegant nature-break convenience - Blended thickness Women’s SELECT Escape 1:1 Chamois for chafe free comfort - BioViz reflective elements for low-light visibility - 8” inseam length (size M) - Main Body: 80% recycled nylon, 20% elastane - Bib mesh: 75% nylon, 25% elastane - Made in China

You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

Shimano Ultegra R8000 crankset. - Optimized lightweight crank arm design produces excellent power transfer efficiency - Minimized weight without sacrificing stiffness - Hollowtech II - Rider tuned gear performance through various gear combinations - Possible to choose the best choice for ride - Redesigned FC for greater frame compatibility - Wider gear pitch increases clearance between chain and leading teeth to provide compatibility with frames with O.L.D. 135mm and 410mm chain stay length - Model Number : FC-R8000 - Series: Ultegra - Crank Construction: Hollowtech II - Crank Arm Length : 165, 170, 172.5, 175mm - Bottom Bracket : SM-BBR60/SM-BBR60-PB - Chain Line: 43.5 - Average Weight: 690 grams (53-39T), 681 grams (52-36T), 674 grams (50-34T), 668 grams (46-36T)

RaceFace Narrow Wide Chainrings feature tooth profiling for chain retention and a blend of weight and durability suitable for XC, DH, and everything in-between. - 7075-T6 aluminum, aerospace grade strength - Compatible with 9, 10, 11 and 12 speed - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing - Reversible laser etched graphics - Non-threaded bolt holes

Proper alignment starts here Bontrager inForm BioDynamic insoles with Superfeet are engineered to harmonize the interface between body, shoe, and bike, giving you the complete foot support you need to ensure mile after mile of pain-free pedaling. Models are color-coded: - Red = Low Arch - Yellow = Mid Arch - Blue = High Arch - Engineered for unparalleled foot control, pedaling efficiency, and comfort - 3D Arch Pillar provides optimal arch support for improved knee alignment - Precision molded heel cup helps stabilize and align the foot - Footrest metatarsal pad helps reduce or eliminate hot foot - inForm BioDynamics—Optimizes natural movement for sustained, higher performance

Flat Mount Disc Caliper Bracket Bolts

Continental tubes are made of seamless butyl rubber and are individually tested for top quality.

- Model Number: RD-R3000-GS - Series: SORA - Maximum Sprocket: 34T - Minimum Sprocket: 11T - Maximum Front Difference: 20T - Total Capacity: 43T

The FC Bite Valve is featured on the FC and Aeria HSF systems to provide a softer interface between user and straw while enabling the rider to better control the flow of fluid. - Compatibility: FC25, FC35, Aeria HSF, Aero HC, Aerodrink, Aqualite, Aqua Cell Straws - Materials: FoodSafe/BPA Free Silicone and Dishwasher Safe - Tube ID: 10mm (.39 inches)

Designed for recreational riders, the Compact DLX MIPS holds the Virginia Tech 5-star "Best Available" protection rating. The helmet includes 20 airflow vents with integrated insect netting, a MIPS layer, and a rear LED light to give you extra confidence as you cruise around town. A refreshingly lightweight option for the recreational cyclist, the MIPS layer gives you extra protection for when the unexpected happens. Awarded the esteemed Virginia Tech 5-star "Best Available" protection rating, you can trust that the Compact DLX MIPS is a great choice for your head. The TS+ Fit System adjusts vertically and horizontally to keep the helmet secure on your head over any bumps in the road or trail. On sunny weekend pedals, the visor will keep you from squinting and the 20 airflow vents integrated insect netting will cool you down. For evening pedals, reflective details and an included rear TS+ LED light keep you visible. The Compact fits everyone, so whether you are sticking to paved paths or venturing onto gravel and dirt trails, this helmet will help protect your head so that you can focus on the adventure ahead! Specifications: WEIGHT: 325g MATERIAL: EPS Foam, Polycarbonate, Nylon FIT SYSTEM: Turnfit+ System (TS+) VENTILATION: 20 ROTATIONAL PROTECTION: MIPS CERTIFICATION: CPSC ACCESSORIES: LED Taillight Features: Adjustable Head Basket Allows the back part of the retention system to be adjusted up and down depending upon your preference and comfort. The nylon ratchet system can be pushed high and out of the way, or low for a feeling of increased security. Insect net Netting on the helmet's front vents prevents bugs from getting inside the helmet and disturbing your ride. Rear LED Light Rear LED light is integrated into the helmet to improve your visibility from the rear in low light conditions. MIPS layer The Multi-Directional Impact Protection System (MIPS) helps reduce the risk of rotational brain injury by isolating your head from the rotation of the helmet shell in the event of an impact. Turnfit Plus system (TS+) A unique fit system which prevents hotspots or pressure points by making the adjustment around the entire circumference of your head. Unisize One size fits all. The helmet shell and fit system is designed to accommodate a wide variety of head sizes and shapes. 5-star protection rating The Virginia Tech impact testing uses the STAR evaluation system to determine the helmet's ability to reduce linear acceleration and rotational velocity of the head resulting from a range of impacts a cyclist might experience. 5-star indicates the "Best Available" rating possible. Virginia Tech recommends the use of any 4- or 5-star rated helmet.

Bold style that combines full coverage protection with cutting edge sport design, the Davos is perfect for those looking for sunglasses that can match their level of performance. The Davos hybrid full frame design excels in running, cycling, and any other athletic endeavor one wants to undertake. - All Tifosi lenses provide 100% protection from harmful UVA and UVB rays and are constructed from scratch-resistant, shatterproof polycarbonate - Grilamid TR-90 frame is made of an incredibly light and durable nylon material that resists chemical and UV damage - Adjustable, hydrophilic rubber nose and ear pieces allow for a custom fit, limiting slippage and increasing comfort - Optically decentered lenses eliminate distortion and prevent unwanted magnification - Vented lenses increase airflow to prevent fogging and help keep you cool - Tifosi's proprietary glare guard lens coating reduces eye strain

ALWAYS A PERFECT FIT! Lil’ Gekko, the next generation of kid’s helmets from Lazer! Drop down side and rear protection keeps little ones safe as they explore the world by bike. A stylish integrated visor looks great and keeps sun out of the eyes and off the face. The Lazer Autofit Retention System automatically adjusts to the riders’ head making the helmet quick and easy to fit, just put it on the head and let the Autofit work its magic. The Lazer Comfort Buckle connects under the ear to prevent chin pinches when fastening the strap. Plenty of vents ensure the helmet interior stays cool and comfortable. - One size fits all - Great side and rear protection - Easy installation - Visor - Rechargeable rear LED light compatible - Fit System: AutoFit system - Construction: In-Mold - Ventilation: 12 vents - Weight: 280g - Certification: CE-CPSC-AS

The BB30 bottom bracket allows you to pair 30mm spindle cranks to 42mm inner diameter bottom bracket shells. Cannondale pioneered this standard along with specially-designed cranks and many have found the benefits to them. Road versions have a 68mm width, MTB has 73mm. These are also the bearings you can use to replace bearings in PF30 cups. You have two bearing choices. The first choice is our low drag, long life Standard Bearing, with hardened-steel races and our super-round CeramicSpeed balls. The second choice is our Coated Bearing, which uses those same balls installed on coated, hardened-steel races for longer life and less bearing drag. BB30 was designed to make the bike lighter: no cups, threading, or redundant metal, plus a lighter, stiffer crank. That's why the crank spindle is 30mm, which was a big jump up from square-taper spindles. CeramicSpeed standard bearings typically have frictional drag of 0.3-0.4 watts per set. That's in the range of a 75% drag reduction compared to standard bottom brackets. That's thanks to balls that are 100% smoother and 15% harder than the ceramic competition. The bearings last at least three times longer than other bearings. In The Box - 2x bearings - 2x 1mm spacers - 2x 0.5mm spacers - 2x dust covers - O-ring - 10ml syringe of grease - Sticker sheet

More fun with more flow Climb to new heights, roam further, and rider harder in the Foray Mountain Shoe. An undeniably comfortable off-road cycling shoe featuring a Boa IP1 dial for a superior fit on rides of any length and intensity. No matter where or how you ride, this shoe won't quit thanks to a stiff sole with a durable upper with the added protection of GnarGuard for an overall reliable trail shoe. - inForm Race last offers a slightly roomier, high-performance fit - Nylon composite Bronze Series sole provides stiff yet walkable performance - Single Boa L6 dial allows easy and precise fit adjustments - Tachyon rubber outsole allows great grip in all terrains - Stiffness index 6 of 14 - Durable, GnarGuard rubberized coating protects against abrasions and fights debris - Compatible with 2-bolt SPD-style cleats

The Wheels Manufacturing PressFit 30 Bottom Bracket Adaptor for Shimano Cranks adapts 24mm Spindle Cranks (Shimano Hollowtech II, FSA, Race Face EXI, etc.) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SHIM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SHIM to adapt 24mm Spindle Cranks (Shimano, FSA, etc.) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter